ASPIRVELO AIR ECOCOMFORT

High efficiency decentralized heat recovery unit

• 
• 
• 
• 
• 

ASPIRVELO AIR ECOCOMFORT FOR MORE INFO

• 
• 
• 
• 
• 

• DESCRIPTION
• TECHNICAL SPECIFICATION
• HOMOLOGATION AND INSTALLATION
• TECHNICAL LITERATURE

• DESCRIPTION
  0

  Thanks to the ceramic heat exchanger the heat of the supply / extracted air flowing through it is accumulated and transferred to the air when the flow is reversed.

  The ventilating unit is equipped with a DC brushless motor that thanks to its reverse function guarantees the correct air change of the room.

  Aspirvelo air Ecocomfort is equipped with a G3 filter, easy to access and replace.

  Aspirvelo air Ecocomfort can be controlled with a wall mounting control unit included in the packaging that allows the user to choose between automatic, extraction only or supply only. The control unit allows to adapt the fan speed according to the temperature difference between the indoor and the outdoor temperature readings.

  The control unit is suitable to regulate for up to 4 units simultaneously.

  General features

  Kits AP19980 and AP19984 include: heat recovery unit with grille, telescopic body, control unit and 12Vdc feeder.

  HEAT RECOVERY UNIT

  • Ventilating unit with DC motor;
  • PVC shockproof telescopic body;
  • Ceramic heat exchanger with efficiency >90%;
  • G3 filter.
  • Flow rectifier to grant higher performances, only for 160mm models;
  • Splash proof protection class: IPX4.

  CONTROL UNIT

  • Ambient temperature 0°C ÷ 45°C;
  • Automatic function: the extract and supply air are automatically alternated;
  • Manual function: either extract or supply mode can be selected;
  • Season setting: thanks to the knob it is possible to optimize the interval of the automatic mode according to the indoor – outdoor temperature difference;
  • 2 speeds: 25 ÷ 50 m³;
  • Splash proof protection class: IP20.
  • Simultaneous control of up to 4 units.

  FEEDER

  • Protections: overload, short circuit, overheating.

  Electric features

  HEAT RECOVERY UNIT

  • Power supply 230V~ 50Hz;
• ADVANTAGES
  0

  Thanks to the ceramic heat exchanger the heat of the supply / extracted air flowing through it is accumulated and transferred to the air when the flow is reversed.

  The ventilating unit is equipped with a DC brushless motor that thanks to its reverse function guarantees the correct air change of the room.

  Aspirvelo air Ecocomfort is equipped with a G3 filter, easy to access and replace.

  Aspirvelo air Ecocomfort can be controlled with a wall mounting control unit included in the packaging that allows the user to choose between automatic, extraction only or supply only. The control unit allows to adapt the fan speed according to the temperature difference between the indoor and the outdoor temperature readings.

  The control unit is suitable to regulate for up to 4 units simultaneously.

  Advantages
• TECHNICAL SPECIFICATION

  CODE	MODEL		Ø TUBE	MAX AMBIENT DIMENSIONS*	SPEED	m³/h	MAX ABSORBED POWER	dB(A) 1.5 m
  AP19980	ECOCOMFORT 160	MASTER	160 mm	44 m² *	low	38	2.0 W	28
  					high	60	4.0 W	34
  AP19979	ECOCOMFORT SAT 160	SECONDARY HEAT RECOVERY UNIT	160 mm	44 m² *	low	38	2.0 W	28
  					high	60	4.0 W	34

   

  CODE	MODEL		Ø TUBE	MAX AMBIENT DIMENSIONS*	SPEED	m³/h	MAX ABSORBED POWER	dB(A) 1.5 mt
  AP19984	ECOCOMFORT 100	MASTER	100 mm	20 m² *	low	12	1.5 W	21
  					high	25	2 W	24
  AP19985	ECOCOMFORT SAT 100	SECONDARY HEAT RECOVERY UNIT	100 mm	20 m² *	low	12	1.5 W	21
  					high	25	2 W	24

  * based on: air exchange equal to 0.5 Vol / h and local height 2.70 meters. Calculation example: ambient surface x 2.70 meters x 0.5 Vol / h
  By increasing the number of slave units it is possible to increase the coverage in square meters.

  CODE	MODEL
  AP19978	Spare filter FR004	for all ECOCOMFORT
  AP19986	KIT COMMISSIONING PHASE	for all ECOCOMFORT 160
  AP1612	GAP 150 – RAIN AND WIND PROTECTION ANTIFACTER	for all ECOCOMFORT 160
  AP19880	SLF 150 – SILENCER	for all ECOCOMFORT 160
• HOMOLOGATION AND INSTALLATION
  Homologation

  • Complies with Reg. (UE) 1254/2014.

  Installation and use

  ECOCOMFORT must be installed on the external walls. Thanks to the telescopic body it fits easily every wall thickness between 24 and 53 cm.

  The external grille can be easily installed from outside or inside without the need of any scaffolding.
• TECHNICAL LITERATURE
  • ECOCOMFORT EN techcnical data sheet
  • ECOCOMFORT installation and user manual IT-EN-FR-ES-DE-RU-ET-LT-SL
  • ECOCOMFORT 160 energy label
  • ECOCOMFORT 100 energy label
  • ECOCOMFORT EN brochure
  • ECOCOMFORT drilling template
  • Conformity EU declaration
  • ECOCOMFORT RU technical data sheet
  • ECOCOMFORT RU brochure
  • BIM Object AP19979
  • BIM Object AP19980
  • BIM Object AP19984
  • BIM Object AP19985
• FAQS