This product is out of production and has been replaced by: CH140GSM2
Electronic programmable thermostat with microprocessor and weekly program to control heating and air conditioning systems, possibility to remote control with text message.
General features
2 auxiliary alarm inputs.
Auxiliary relay output (free voltage contacts) programable by user.
Input for remote temperature probe.
Backup battery for keeping program data and time/day
Power reserve for sending messages in case of lack of tension (BLACKOUT)
Dimensions: 137x90x27 mm.
Electric features
Software: A class
SIM GSM in conformity to GSM 11.12 phase 2+ standard (all SIM except USIM Provider 3G)
Power supply: 230V-50Hz
Max absorbed power: 10W.
Contact rating: 5(3)A 250Vac
Voltage free switching contacts.
Micro disconnection: 1 Bu.
ADVANTAGES
0
This product is out of production and has been replaced by: CH140GSM2
Electronic programmable thermostat with microprocessor and weekly program to control heating and air conditioning systems, possibility to remote control with text message.
Advantages
TECHNICAL SPECIFICATION
CODE
TEMPERATURE
RANGE
POWER SUPPLY
CONTACT
RATING
CH140GSM
2 ÷ 40 °C
230V 50Hz
5(3)A 250Vac
HOMOLOGATION AND INSTALLATION
Homologation
Complies with EN 60730-1 standards and following parts, R&TTE EN 301 489-1, EN 301 489-7, EN 301 511.
ErP classification: ErP Class IV; 2% (Reg. EU 811/2013 – 813/2013)
Installation and use
Intellicomfort CH140GSM programmable thermostat has to be installed on the wall or in a 3 modules or round flush mounting box, at about 1,5 meters above the floor.
Intellicomfort CH140GSM has 6 keys, which function depends on the situation and is described by the symbol that appears on the display:
MAN Manual program
AUTO Weekly program
HOLIDAY Daily program
JOLLY Temporary program
OFF Switched off system or antifreeze program
REMOTE PROGRAMMING THROUGH SMS
By using GSM function it is possible:
Programmare la temperatura dell’abitazione
Check statistic data about system functioning
Low temperature alarm if the ambient temperature drops below the set temperature
Receive notification about sim validity due date
Receive notification about lack tension 230V (BLACKOUT)
Receive notification about tension come back (POWER ON)
Modify the programmable thermostat timing
Receive notification about changes of the two alarms contacts status (e.g. a boiler alarm, an antitheft alarm, a low temperature
alarm, a boiler malfunction, an alarm for sewage tanks overflow etc)
Intelliconfort CH140GSM allows a remote system control and command the state (different mode of use, modify set-point etc).
Moreover, it sent spontaneously messages indicating SIM card due date, a black-out or when the low temperature threshold is exceeded (which value is set by the customer).
