OCS1

Sequential control unit for motorized rolling shutters

• 
• 

OCS1 FOR MORE INFO

• DESCRIPTION
• TECHNICAL SPECIFICATION
• HOMOLOGATION AND INSTALLATION

• DESCRIPTION
  0

  Sequential control unit for motorized rolling shutters

  General features

  • Operating temperature -20 ÷ 40 ° C
  • Max. Of applicable motors 10
  • Motor power supply time max. 3 min.

  Electric features

  • Power supply 230Vac 50Hz
  • Voltage of centralized control signal 12 V.d.c.
  • Maximum current for each output 5A
  • Protection fuses 2 x 3.15A F
• ADVANTAGES
  0

  Sequential control unit for motorized rolling shutters

  Advantages
• TECHNICAL SPECIFICATION

  CODE	POWER SUPPLY	OPERATING TEMPERATURE	PROTECTION DEGREE
  OCS1	230Vac 50Hz	-10 ÷ 60 °C	IP55

• HOMOLOGATION AND INSTALLATION
  Homologation

  • Compliance with EN 60335-2-9

  Installation and use

  • Allows simultaneous operation of several motors, up to a maximum of 10, operated by push-buttons (with automatic release),  maintaining the possibility of individual operation for each motor, again using pushbuttons (with automatic release).
  • To control from 2 to 10 motors with a sequential system, that is one motor after another at pre-established intervals, to prevent excessive electric absorption at the same time.

  • Operation becomes effective 2 seconds after the relative push-button is pressed, while the outputs remain supplied for about 4 minutes, during which individual control is disabled to avoid accidental operation.

  • A timer may also be connected for timed control of closing and opening or a remote control used for long distance control.

   

  ACCESSORIES

  • Code 1573505: expansion module for the sequential control of an additional motor
• TECHNICAL LITERATURE
• FAQS