Infrared electric heater with a compact and attractive design, suitable for indoor use: houses, apartments, laboratories, shops etc.
It can also be installed outdoors but in areas protected against atmospheric agents (e.g. verandas, roofing, etc.).
General features
Aluminium body with epoxy powder coating
Bracket for wall mounting, provided
Protection grille already installed
ON/OFF switch already installed
Long life irradiation bulb (5000 hours)
3 m power cable with SHUKO plug already connected to the lamp
ACCESSORIES:
Power regulator 3000 W
SPARE PARTS:
Irradiation bulb 1300W
Electric features
Power supply 220-240V-50Hz
W max 1300
ADVANTAGES
0
Infrared electric heater with a compact and attractive design, suitable for indoor use: houses, apartments, laboratories, shops etc.
It can also be installed outdoors but in areas protected against atmospheric agents (e.g. verandas, roofing, etc.).
Advantages
TECHNICAL SPECIFICATION
Code
Model
V~
Hz
W
IP
Kg
AP6460
KALORDOMUS
220-240
50
1300
X5
0.95
IRRADIATION RANGE
Recommended height of installation
1.90 – 2.20 m
Recommended mounting
WALL mounting with 45° inclination
Coverage area
about 15 m²
Power distribution on the surface
86 W/m²
THERMAL TESTS
Product placed at 45° inclination at room temperature of 8° C
Tests carried out in more points at 1,00 m
Average gradient value: 49.0°C
Ttests carried out in more points at 1,50 m
Average gradient value: 37.3°C
Tests carried out in more points at 2,00 m
Average gradient value: 27.3°C
Tests carried out in more points at 2,50 m
Average gradient value: 22.7°C
Pay a special attention if in the comfort area people are standing or sitting. In low temperature situation, maintain the minimum distance between the lamps.
Note: the values of the irradiation range detected by the test can vary according to the installation height, the distance between the lamps, the environmental conditions and to the synergy that could arise between multiple installed lamps.
