Temperature probe suitable to optimize the temperature control of gyms, shopping malls and villas by introducing as parameter the ambient temperature.
General features
Case in thermoplastic material.
Connection between the probe and control unit by means of two-wire cable with 1 mm² minimum section and maximum length of 1000 meters (for longer lengths increase cable section).
NTC thermistor heat-sensitive element.
Operating admissible temperature: -10 ÷ 45 °C.
Potentiometer for set-point variation: ± 3 °C.
Electric features
3-pole terminal board.
Probe functioning: terminals 1-2 connection excludes the possibility of set-point variation (± 3°C).
Probe functioning with set-point variation: connect the terminals 1-3.
Function of set-point correction: connect the terminals 2-3.
ADVANTAGES
0
Temperature probe suitable to optimize the temperature control of gyms, shopping malls and villas by introducing as parameter the ambient temperature.
Advantages
TECHNICAL SPECIFICATION
HOMOLOGATION AND INSTALLATION
Homologation
In conformity with EN 60730-2-9 standard.
Installation and use
Wall mounting.
Possibility to choose the operation mode (set by means of the control unit):
ambient probe;
set-point variation (± 3°C);
ambient probe with set-point variation.
Its use is particularly indicated where is possible to identify a local sample in which you want to achieve a high precision of the temperature control.
The sensing element consists from a linearized NTC thermistor. A potentiometer installed on the device is used to remotely change the set-point value set on the units compatible to EV series.