Room thermostat supplied at 230V-50Hz
-
DESCRIPTION
General features0
Electronic room thermostat, suitable for heating and cooling installations, for houses and offices.
Used as well for direct control of the circulation pump, burner, air-conditioner, etc.
- 1 adjustable temperature.
- Red LED to indicate relay intervention.
- WINTER – OFF – SUMMER switch.
- Pollution degree 2.
- Double insulation.
- Unit weight 0.16 Kg
Electric features- Power supply 230V-50Hz.
- Consumption 1VA.
- Micro disconnection (1B).
- Pulse voltage 4000V.
- Voltage-free switching contact
-
ADVANTAGES
0
Electronic room thermostat, suitable for heating and cooling installations, for houses and offices.
Used as well for direct control of the circulation pump, burner, air-conditioner, etc.
Advantages -
TECHNICAL SPECIFICATION
CODE TEMPERATURE RANGE DIFFERENTIAL * POWER SUPPLY CONTACT RATING C60 6 ÷ 30°C 0.5 K 230V-50Hz 6(1.5)A 250Vac * Differential values are referred to a thermal gradient of 4K/h -
HOMOLOGATION AND INSTALLATION
Homologation
- Complies with EN 60730-1 standards and corresponding parts.
- ErP Class I; 1% (Reg. EU 811/2013 – 813/2013).
Installation and use- Wall mounting or in 3-module embedded box or in round box.
- In winter operating mode when the temperature increases, 3-1 contact opens and 3-2 contact closes. Terminal 2 is free and can be used for signaling or for other alarms.
- Sensitive element with NTC sensor.
- The low differential makes the thermostat very sensible, which regulates with high precision the room temperature.
- C60 has a switch that allows choosing the operation mode:
– SUMMER (for cooling installations);
– WINTER (for heating installations);
– OFF OFF (turns off the system completely). - The red LED indicates relay operation, in case of heating (switch stays in position “winter“) or cooling (switch stays in position “summer“).
- TECHNICAL LITERATURE
-
FAQS
