Preset and ready to use Wireless thermoregulation kit with remote actuator.
-
DESCRIPTION
General features0
Preset and ready to use Wireless thermoregulation kit with remote actuator.
It can manage heating, air conditioning and humidity systems.- Zone heating, cooling and humidity control;
- 3 settable temperatures: COMFORT, ECONOMY and OFF
- Lock function with password;
- Standard time management;
- White positive backlight LCD;
- Possibility to expand the relay (on board) for controlling the dehumidification separately
- Possibility to expand up to 8 temperature zones
- It can control up to 15 wireless actuators, O60RF or CH175;
Electric features- CH120RF ELECTRIC FEATURES
Power supply: 2 batteries AA 1,5V
Contacts rating: 5(3)A 250 Vca
Type of action: 1 B.U. (connection micro-switch)
Output type: 1 relay for heating/cooling or humidity systems (3 screw clamps (closed + open)
Software: A class
Electric insulation: Double insulation
Transceiver frequency 868Mhz - CH175 ELECTRIC FEATURES§
Power supply:230Vca ±10% – 50Hz
Power consumption: 20VA max (load excluded)
Transceiver frequency: 868Mhz
Maximum radio frequency power transmitted: < 10mW
Contacts rating: 16(4)A – 250Vca
Maximum cables size: 2,5 mm²
-
ADVANTAGES
0
Preset and ready to use Wireless thermoregulation kit with remote actuator.
It can manage heating, air conditioning and humidity systems.Advantages- Preset and ready-to-use kit to control the heating/cooling systems through its remote control relay
- Possibility to expand the relay (on board) for controlling the dehumidification separately
- Possibility to expand up to 8 temperature zones
-
TECHNICAL SPECIFICATION
Kit composition:
1 CH120RF wireless thermostat
1 CH175 remote wireless actuator -
HOMOLOGATION AND INSTALLATION
Homologation
- Complies with EN 60730-1 standards;
- Responding to Directive 2014/53 / EU (RED).
- ErP Classification (Reg. EU 811/2013 – 813/2013):
◊ Class IV; 2%
Installation and use- Wall mounting or in 3-module embedded box (503) or in round box with axle spacing of 60 mm.
- It is supplied with a base suitable for installation in embedded (503) rectangular or round boxes, or on the wall.
- No changes are necessary to the existing system.
- The CH120RF, equipped with a temperature sensor and relative humidity is a thermostat for the thermo-hygrometric control of the environment both in winter and summer.
- It has a configurable internal relay and can operate, via wireless connection, up to 15 CH175 relay actuators;
- It can control up to 15 actuators O60RF on radiators via wireless connection.
- It can operate alone (single zone) as a room thermostat or can be inserted into the Intellicomfort + wireless multizone system.
FUNCTIONING AS A SINGLE AREA:
- TCOM adjustable temp. from 2°C to 40°C
- TECO adjustable temp. from 2°C to 40°C
- TOFF, OFF temperature set in the “regulation” mode from 0 to 7°C to ensure frost protection function.
- Relative humidity RH% (adjustable from 30 to 70% or OFF);
- Summer/winter mode;
OPERATION AS A COMPONENT OF MULTIZONA INTELLICOMFORT + SYSTEM:
The CH120RF obtain the operating mode, the temperature set-point and relative humidity from CH180RF;- The CH120RF can locally change the temperature set-point values and changes can be temporary or permanent;
- Possibility in areas controlled by CH120RF to enable or disable the cooling and dampening;
- Keypad lock with command sent by the CH180RF.
EXTRA FUNCTIONS (ALWAYS VALID)
- Display lock function for cleaning.
- Anti-condensate function;
- Corrected reading temperature (± 4 ° C);
- Min and max lock setting temperature set-point (winter / summer);
- Static adjustment differential (0.3 ÷ 2 ° C);
- Auxiliary input for floor probe management (EC19);
- Configurable relay output (heating only, cooling only, heating + cooling humidistat;
- Display of the status of other devices associated with the CH120RF (useful for starting).
- TECHNICAL LITERATURE
-
FAQS
